Anionic Polyacrylamide Powder For Water Treatment
Brand Jiufang
Product origin Shenyang
Delivery time Lead time: 7days
Supply capacity 2000Metric Tons per Month
1.Anionic polymer could be used for industrial and domestic water treatment.
2.High charge product is used for polyacrylamide for produced water treatment.
3.Anionic polyacrylamide could be used for sewage and wastewater treatment.
Download
Anionic polymer, also named anionic polyacrylamide, which is widely used in various wastewater treatment plants. Anionic polyacrylamide powder in industrial water is commonly used in the pretreatment process, which lies in dissolved air flotation (DAF).
There is a close relationship between the flocs formed after treating sewage using dry polyacrylamide and the air flotation machine.
During the operation of the air flotation machine, chemical agents such as flocculants are usually added. The dry polyacrylamide promote the mutual coagulation of suspended particles, colloids and other substances in the water to form flocs.
The characteristics such as the size and density of the flocs are crucial for the separation effect of the air flotation machine.
The air flotation machine generates tiny bubbles, allowing the bubbles to combine with the flocs to form gas-floc combinations.
Due to the density of the gas-floc combinations being less than that of water, they float to the water surface, thereby achieving separation from the water. This separation method is efficient and rapid, and can effectively remove pollutants such as suspended solids and oils in the water.
The appropriate size and density of the flocs can better combine with the bubbles, improving the separation efficiency of the air flotation machine. If the flocs are too small, they may be difficult to fully combine with the bubbles; if the flocs are too large, they may lead to sedimentation instead of floating. The operating parameters of the air flotation machine, such as bubble size and gas-water ratio, also affect the separation effect of the flocs. By adjusting these parameters of dry polyacrylamide, the processing capacity of the air flotation machine for the flocs can be optimized.
In the pretreatment process, anionic polymer (such as anionic polyacrylamide for water treatment and polyacrylamide for produced water) is the priority to choose the polymer.
At these points, using anionic polymer will reduce the SS value and keep the next process running smoothly.
Polyacrylamide powder in industrial water and anionic polyacrylamide for water treatment, in these processes, anionic polymer is indispensable.
Dry polyacrylamide is dried product after polymerization and mesh is 60-80.
Industry-specific attributes:
| Name | Dry Polyacrylamide for produced water | |||
| Chemical Formula | (C3H5NO)n | |||
| CAS NO. | 9003-05-8 | |||
Other Attributes:
| Appearance | Anionic polymer powder | |||
| Solid Content | 90% | |||
| Molecular Weight 10*6 | 16 | |||
| Density(25℃） | 0.75g/cm3 | |||
| PH Value(1% water solution) | 6~8 | |||
| Anionic Charge | 30% | |||
| Dissolving Time,min | ＜30 | |||
| Storage Temperature,℃ | 0~35 | |||
| Shelf Life,month | 24 | |||
Supply Ability:
| Supply Ability | 2000Metric Tons per Month | |||
Lead Time:
| Quantity(kilograms) | 1~50 | ＞50 | |
| Lead Time(days) | 7 | negotiated | |
